dc/dc converters c class non-isolated 1 2 year warranty sil15c series 5vin and 12vin single output ? 15a current rating ? input voltage range: 4.5v - 5.5v or 10.2v - 13.8v ? output voltage range: 0.9v - 5.0v ? industry leading value ? cost optimised design ? excellent transient response ? output voltage adjustability ? pathway for future upgrades ? supports silicon voltage migration ? resulting in reduced design-in and qualification time ? designed in reliability: mtbf of >7 million hrs per telcordia sr-332 the sil15c series is a new high density open frame non-isolated converter for space- sensitive applications. each model has a wide input range (4.5v to 5.5v or 10.2v to 13.8v) and offer a wide 0.9v to 3.3v/5v output voltage range with a 15a load. an external r esistor adjusts the output voltage from its pre-set value of 0.9v to any value up to the maximum allowed value for that model. typical efficiencies are 89% for the 5v input version and 91% for the 12v input version. the sil15c series offers remote on/off and over-current protection as standard. with full international safety approval including en60950 and ul/cul60950 , the sil15c reduces compliance costs and time to market. new product all specifications are typical at nominal input, full load at 25c unless otherwise stated specifications output specifications v oltage adjustability 5v input models 0.9v to 3.3v (see note 5) 12v input models 0.9v to 5.0v output setpoint accuracy with 1.0% trim resistors 2.5% line regulation low line to high line 0.2% max. load regulation full load to min. load 0.5% max. min/max load 0a/15a overshoot 5v input models 3% max. (at turn on) 12v input models 1% max. undershoot 100mv max. ripple and noise (see note 1) see table 5hz to 20mhz t ransient response deviation 100mv (see note 2) 200s recovery to within regulation band input specifications input voltage range 5v input model 4.5 to 5.5vdc 12v input model 10.2 to 13.8vdc input current minimum load 65ma remote off 20ma input current (max.) 5v input model 11.5a @ io max. (see note 3) 12v input model 8.1a @ io max. input reflected ripple 5v input model 200ma (pk-pk) (see note 4) 12v input model 200ma (pk-pk) remote on/off logic compatibility active high on >2.4vdc off <0.8vdc start-up time power up <20ms (see note 9) remote on/off <20ms file name: sil15c.pdf rev: 04 mar 2003 international safety standard approvals ul/cul can/csa 22.2 no. e139421 ul60950 file no. e139421 tv tv product service (en60950) certificate no. b0211 19870 205 cb report and certificate to iec60950 input specifications (contd.) tu rn on threshold 5vin 4.5vdc 12vin 9.0vdc tu rn off threshold 5vin 4.3vdc 12vin 7.5vdc general specifications efficiency see table switching frequency fixed 200khz approvals and (see note 4) tv product services standards (pending) iec60950, ul/cul60950 material flammability ul94v-0 w eight 14.2g (0.5oz) mtbf telcordia sr-332 7,817,294 hours environmental specifications thermal performance operating ambient, 0oc to +80oc (see note 8) temperature non-operating -40oc to +125oc protection short-circuit protection hiccup, non-latching recommended system capacitance input capacitance (see note 11) 270f/20m? esr max. output capacitance (see note 11) 680f/10m? esr max.
for the most current data and application support visit www.artesyn.com/powergroup/products.htm sil15c series 5vin and 12vin single output dc/dc converters c class non-isolated 2 new product notes 1 measured as per recommended set-up. cin = 270f (20m? esr max, cout = 680f (10m? esr max). 2 di/dt = 10 a/s, vin = nom, tc = 25 c, load change = 0.50 lo max. to 0.75 lo max. and 0.75 lo max. to 0.50 lo max. 3 external input fusing is recommended. 4 measured with external filter. see application note 131 for details. 5 uses external resistor from trim pin to output ground. min value = 485? for 5v model, 280? for 12v model. see application note 131 for details. 6 signal line assumed <3m in length 7 this product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 the standard unit with the suffix '-v' is for vertical mounting. to order a unit with horizontal mounting, please add the suffix '-h' to the model number, e.g. sil15c-05sadj-h. 9 power-up is the time from application of dc input to power good enabled. remote on/off is from on/off asserted high to power good enabled. 10 see application note 131 for operation above 50oc. 11 see application note 131 for ripple current requirements. 12 these models have a wide trim output. 5vin has an output of 0.9v to 3.3v and 12 vin has an output of 0.9v to 5v. an external resistor adjusts the output voltage. output input ovp output output output efficiency regulation model power voltage voltage (12) current current (typ.) line load number (8) (max.) (min.) (max.) 50w 4.5 - 5.5vdc n/a 0.9v - 3.3v 0a 15a 89% 0.2% 0.5% sil15c-05sadj-v 75w 10.2 - 13.8vdc n/a 0.9v - 5.0v 0a 15a 91% 0.2% 0.5% SIL15C-12SADJ-V ripple and noise specification output model v oltage pk - pk rms 5v input models 0.9 to 2.5v 30mv 15mv 3.3v 40mv 15mv 12v input models 0.9 to 2.5v 50mv 20mv 3.3v to 5v 50mv 20mv caution: high internal temperatures. ensure that unit is not user accessible. file name: sil15c.pdf rev: 04 mar 2003 SIL15C-12SADJ-V part number system with options rated output current 15 = 15amps number of outputs sadj = single adjustable output product family sil = single in line performance c= cost optimised input voltage 05 = 4.5v - 5.5v 12 = 10.2v - 13.8v the ultra-wide output voltage trim range offers major advantages to users who select the sil15c series. it is no longer necessary to purchase a variety of modules in order to cover different output voltages. the output voltage can be trimmed in a range of 0.9v to 5.0v. when the sil15c series converter leaves the factory the output has been adjusted to the default voltage of 0.9v output voltage adjustment of the sil15c series mounting option v = vertical mount h= horizontal mount
for the most current data and application support visit www.artesyn.com/powergroup/products.htm sil15c series 5vin and 12vin single output dc/dc converters c class non-isolated 3 new product data sheet ? artesyn technologies ? 2003 the information and specifications contained in this data sheet are believed to be correct at time of publication. however, art esyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. please consult our website for the following items: ? application note ? longform data sheet www.artesyn.com mechanical support pin 2 places 0.150 (3.81) ref 0.120 (3.05) 13 places 0.64 (0.025) typ 1.100 (27.94) 1.000 (25.40) 2 places 1.200 (30.48) 0.025 (0.64) typ pin 1 pin 11 0.062 (1.57) ref 0.475 0.025 (12.08 0.64) 0.260 0.015 (6.70 0.40) 1.100 (27.94) 1.050 (26.67) 0.100 (2.54) 9 places 0.150 (3.81) 0.050 (1.27) 2 places 0.050 (1.27) ref all dimensions in inches (mm) general tolerance 0.01in ( 0.25mm) except where specified otherwise figure 1: mechanical drawing - horizontal mount version 0.40 0.025 (10.186 0.635) all dimensions in inches (mm) general tolerance 0.01in ( 0.25mm) except where specified otherwise 0.26 0.015 (6.704 0.381) 0.062 (1.57) ref 0.075 (1.91) 1.200 (30.48) 0.140 (3.56) 11 places 0.025 (0.64) typ pin 11 pin 1 0.050 (1.27) ref 0.050 (1.27) typ 1.10 (27.940) 0.025 (0.64) typ 1.050 (26.67) 0.100 (2.54) 9 places 3.81 (0.150) 0.050 (1.27) figure 2: mechanical drawing - vertical mount version file name: sil15c.pdf rev: 04 mar 2003 pin connections pin number function 1v out 2v out 3v out 4t rim 5 remote on/off 6 power good 7g r ound 8g r ound 9 reserved 10 vin 11 vin 12 mechanical support (horizontal version only) 13 mechanical support (horizontal version only)
|
